316 型不銹鋼在模擬沸水式反應器環璅中之慢應變速率測試和金相研究

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 化學工程與材料工程學系暨碩士班 > 期刊論文 > Item 987654321/35603

請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/35603

題名:	316 型不銹鋼在模擬沸水式反應器環璅中之慢應變速率測試和金相研究
作者:	鄒仁江陳漢忠施漢章
貢獻者:	化材系
關鍵詞:	銹鋼反應器沸水式金相測試慢應變速率模擬環璅
日期:	1992-12
上傳時間:	2017-03-17 09:03:44 (UTC+8)
摘要:	研究使用慢應變速率測試(SSRT)探討沃斯田鐵系316型不�袗�在288 ℃含氧低氯的水溶液中應力腐蝕斷裂的現象。在高氧含量(0.5~45ppm)環境中，敏化狀態316型不�袗�之應力腐蝕斷裂相當嚴重，其次是退火狀態，而在低氧含量 (約0.05ppm)的環境中，也有應力腐蝕現象發生，且退火狀態比敏化處理後的要嚴重。由結果顯示退火316型不�袗�在高氧含量(9~45ppm)及低氧含量(約0.05ppm)下的應力腐蝕均為滑移一溶解(Slip-dissolution)的機理，前者在低應力狀態下即會造成A 式穿晶應力腐蝕，而後者須處於高應力下(頸縮後)才會有B式穿晶應力腐蝕現象。而敏化316型不�袗�在O��>0.5ppm環境下，其二次裂縫分佈屬於A式應力腐蝕，其斷裂模式分別為沿晶應力腐蝕(O�砥�2.2ppm)和沿晶-穿晶混合式應力腐蝕 (0.5) The slow strain rate test (SSRT) has been successfully utilized to study the susceptibility of 316stainless steel to stress corrosion cracking (SCC) in low chloride oxygenated water at 288℃. In high oxygenated water (0.5 ~45ppm), sensitized 316 stainless steels suffer most severe SCC, while annealed ones were much less. On the other hand, in low oxygenated water (~0.05 ppm), annealed 316 stainless steelsuffer much severe SCC than the sensitized ones. Results show that the SCC for annealed 316 S.S. in water with both high oxygen content (9-45ppm) and low oxygen (~0.05 ppm) belongs to the slip-dissolution mechanism, and the former suffers type A TGSCC at lower stress level while the latter suffers type B TGSCC at higher stress (after necking).Furthermore, the secondary crack distribution of sensitized 316 S.S. belongs to type A SCC in O�� ≧ 0.5ppm, the fracture mode is IOSCC (O�� ≧ 2.2 ppm) and IGSCC+TGSCC mixed mode (0.5 < O�� < 1.6ppm). However, when the oxygen content is lower than 0.2 ppm, the fracture mode becomes type B TGSCC.
關聯:	材料科學 24:4 民81.12 頁250-262
顯示於類別:	[化學工程與材料工程學系暨碩士班] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	255	檢視/開啟

檢視Licence

在CCUR中所有的資料項目都受到原著作權保護.

資料載入中.....