文化大學機構典藏 CCUR:Item 987654321/35603
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 46833/50693 (92%)
Visitors : 11847324      Online Users : 524
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/35603


    Title: 316 型不銹鋼在模擬沸水式反應器環璅中之慢應變速率測試和金相研究
    Authors: 鄒仁江
    陳漢忠
    施漢章
    Contributors: 化材系
    Keywords: 銹鋼
    反應器
    沸水式
    金相
    測試
    慢應變速率
    模擬
    環璅
    Date: 1992-12
    Issue Date: 2017-03-17 09:03:44 (UTC+8)
    Abstract: 研究使用慢應變速率測試(SSRT)探討沃斯田鐵系316型不�袗�在288 ℃含氧低氯的水溶液中應力腐蝕斷裂的現象。在高氧含量(0.5~45ppm)環境中,敏 化狀態316型不�袗�之應力腐蝕斷裂相當嚴重,其次是退火狀態,而在低氧含量 (約0.05ppm)的環境中,也有應力腐蝕現象發生,且退火狀態比敏化處理後的要嚴 重。 由結果顯示退火316型不�袗�在高氧含量(9~45ppm)及低氧含量(約0.05ppm)下的應 力腐蝕均為滑移一溶解(Slip-dissolution)的機理,前者在低應力狀態下即會造成A 式穿晶應力腐蝕,而後者須處於高應力下(頸縮後)才會有B式穿晶應力腐蝕現 象。而敏化316型不�袗�在O��>0.5ppm環境下,其二次裂縫分佈屬於A式應力腐 蝕,其斷裂模式分別為沿晶應力腐蝕(O�砥�2.2ppm)和沿晶-穿晶混合式應力腐蝕 (0.5)
    The slow strain rate test (SSRT) has been successfully utilized to study the susceptibility of 316stainless steel to stress corrosion cracking (SCC) in low chloride oxygenated water at 288℃. In high oxygenated water (0.5 ~45ppm), sensitized 316 stainless steels suffer most severe SCC, while annealed ones were much less. On the other hand, in low oxygenated water (~0.05 ppm), annealed 316 stainless steelsuffer much severe SCC than the sensitized ones. Results show that the SCC for annealed 316 S.S. in water with both high oxygen content (9-45ppm) and low oxygen (~0.05 ppm) belongs to the slip-dissolution mechanism, and the former suffers type A TGSCC at lower stress level while the latter suffers type B TGSCC at higher stress (after necking).Furthermore, the secondary crack distribution of sensitized 316 S.S. belongs to type A SCC in O�� ≧ 0.5ppm, the fracture mode is IOSCC (O�� ≧ 2.2 ppm) and IGSCC+TGSCC mixed mode (0.5 < O�� < 1.6ppm). However, when the oxygen content is lower than 0.2 ppm, the fracture mode becomes type B TGSCC.
    Relation: 材料科學 24:4 民81.12 頁250-262
    Appears in Collections:[Department of Chemical & Materials Engineering] journal articles

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML255View/Open


    All items in CCUR are protected by copyright, with all rights reserved.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback