資料載入中.....
|
請使用永久網址來引用或連結此文件:
https://irlib.pccu.edu.tw/handle/987654321/41814
|
| 題名: | Performance evaluation of a multi-stage plate-type membrane humidifier for proton exchange membrane fuel cell |
| 作者: | Yan, WM (Yan, Wei-Mon)
Chen, CY (Chen, Chen-Yu)
Jhang, YK (Jhang, You-Kai)
Chang, YH (Chang, Yu-Hsuan)
Amani, P (Amani, Pouria)
Amani, M (Amani, Mohammad) |
| 貢獻者: | 機械工程系暨機械工程學系數位機電研究所 |
| 關鍵詞: | OPERATING PARAMETERS
WATER
GAS
MODEL
STACK
HEAT |
| 日期: | 2018-11-15 |
| 上傳時間: | 2019-01-16 11:36:11 (UTC+8) |
| 摘要: | The influence of channel dimension and altering dry air inlet conditions such as temperature and humidity on the humidification efficiency of a multi-stage plate-type membrane humidifier for kW-scale proton exchange membrane fuel cells is analyzed in terms of the dew point approach temperature, water recovery ratio, pressure loss, and the coefficient of performance, Investigating the effect of channel dimension reveals that the width and depth of the channel significantly affect the humidification performance. The results show that the increase of dry air inlet temperature and humidity leads to improving the dew point approach temperature, decreasing the water recovery ratio, slight increasing the pressure drop, and consequently decreasing the coefficient of performance. The minimum dew point approach temperature and maximum water recovery ratio occur at the flow rate of 30 L/min. The highest water recovery ratio, 73%, is achieved at the temperature of 50 degrees C and relative humidity of 40%. Moreover, the pressure loss increases with the increment of air flow rate and the coefficient of performance declines with the increase of air flow rate. Thus, it is recommended to select the minimum possible flow rate, dry air inlet temperature, and relative humidity as the efficient operating condition. |
| 顯示於類別: | [機械工程系暨機械工程學系數位機電研究所] 期刊論文
|
文件中的檔案:
| 檔案 |
描述 |
大小 | 格式 | 瀏覽次數 |
|---|
| index.html | | 0Kb | HTML | 195 | 檢視/開啟 |
|
在CCUR中所有的資料項目都受到原著作權保護.
|
