文化大學機構典藏 CCUR:Item 987654321/36215
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 46833/50693 (92%)
造訪人次 : 11853225      線上人數 : 560
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    主頁登入上傳說明關於CCUR管理 到手機版


    請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/36215


    題名: 不同硬軟鏈段熱塑性聚氨酯經電漿改質對蛋白質貼附的影響之研究
    The Protein Attached of Influence by Plasma Modified on the Different Hard Segments and Soft Segments Thermoplastic Polyurethane Film
    作者: 李貴琪
    賴昀辰
    施亭宇
    貢獻者: 紡工系
    關鍵詞: 電漿
    熱塑性聚氨酯
    蛋白質貼附
    plasma
    thermoplastic polyurethane
    protein attached
    日期: 2013-06
    上傳時間: 2017-06-14 16:00:52 (UTC+8)
    摘要: 由於不同軟硬鏈段比例所組成的熱塑性聚氨基甲酸酯(Thermoplastic polyurethane, TPU)其物理性質及化學性質而也有所不同,因此熱塑性聚氨基甲酸酯被廣泛的應用在各個領域中。熱塑性聚氨酯因為具有較高的生物相容性及血液相容性,且物化性優良,所以在生醫的領域中也是常見的生醫材料。本研究主要是利用電漿改質技術將熱塑性聚氨酯Tecoflex□93A、60D 及68D 進行表面處理,並利用接觸角測量儀測量熱塑性聚氨酯的表面親水性,結果顯示當電漿時間為5 分鐘時93A、60D 及68D 的接觸角的變化量趨於相似,而電漿處理完一天後仍有較高的接觸角變化量,硬度最高之材料回升最不明顯。在白蛋白的測試結果中可以發現不同的電漿時間會影響白蛋白的貼附濃度,且薄膜成形時的接觸面也會影響薄膜的軟硬鏈段的分佈,經電漿改質後其白蛋白的濃度也會因接觸面而有所不同的變化。
    Because the different ratio of soft and hard segments composed of thermoplastic polyurethane(TPU) that have different physical properties and chemical properties, a result thermoplastic polyurethanes are widely used in various areas. Thermoplastic polyurethane has high biocompatibility and blood compatibility , and has excellent physical and chemical properties , so common in the areas of biomedical biomaterials. This mainly study the modified thermoplastic polyurethane surface treatment by the plasma , and measuring the surface of the thermoplastic polyurethane hydrophilic by using a contact angle measuring instrument. The results showed , when the plasma time of 5 mins, 93A, 60D and 68D which contact angle change amount tends to similarity, the contact angle still have higher changes amount by plasma treatment after a day. The highest hardness of the material is most has not obvious rebound in. In the test results, different plasma time can affect the of protein attached concentration, film forming a contact surface will affect the distribution of the hard and soft segments in the film. By plasma modification of the thermoplastic polyurethane that protein concentration have different changes in the contact surface.
    關聯: 華岡紡織期刊 ; 20卷2期 (2013 / 06 / 01) , P74 - 82
    顯示於類別:[紡織工程學系] 學報-華岡紡織期刊

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML119檢視/開啟


    在CCUR中所有的資料項目都受到原著作權保護.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋