English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 46833/50693 (92%)
造訪人次 : 11849774      線上人數 : 605
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    主頁登入上傳說明關於CCUR管理 到手機版


    請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/36013


    題名: Feasibility Assessments of the Use of Recycled Fibers in Nonwoven Fabrics
    作者: Lin, JH (Lin, Jia-Horng)
    Hsing, YL (Hsing, Yan-Lan)
    Hsing, WH (Hsing, Wen-Hao)
    Pan, YJ (Pan, Yi-Jun)
    Hsieh, CT (Hsieh, Chien-Teng)
    Lou, CW (Lou, Ching-Wen)
    貢獻者: 紡工系
    關鍵詞: environmental protection
    recycled fiber
    far infrared (FIR) emissivity
    日期: 2017-01
    上傳時間: 2017-04-26 15:47:42 (UTC+8)
    摘要: Environmental protection has become an increasing concern, which makes recycling and reclaiming highly important. In addition to governmental campaigns and promotion, enterprises should examine each perspective thoroughly in order to prevent excessive resource consumption. In this study, recycled materials, including recycled far-infrared polyester (FPET) fiber, three-dimensional crimped hollow flame-retarding (TPET) fiber, and low-melting-point polyester (LPET) fiber, are used to form nonwoven fabrics. The influence of different amounts of FPET fiber, 0-80 wt %, on the properties of nonwoven fabrics was examined. The sheath of LPET fibers can be melted as a result of hot pressing, which provides cohesion between fibers that mechanically improves the nonwoven fabrics. The tensile strength, tearing strength, air permeability, and far infrared (FIR) emissivity of the nonwoven fabrics were examined, thereby determining the optimal parameters. The test results show that the thermally treated nonwoven fabrics have better mechanical properties and FIR emissivity, compared to those of non-thermally treated nonwoven fabrics. Moreover, more FPET fibers cause the mechanical properties along the cross machine direction (CD) to decrease by 9% and that along the machine direction (MD) to decrease by 5%. In particular, all the thermally treated samples exhibit a FIR emissivity of 0.8, which is health-promoting.
    關聯: APPLIED SCIENCES-BASEL 卷: 7 期: 1
    顯示於類別:[紡織工程學系] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML391檢視/開啟


    在CCUR中所有的資料項目都受到原著作權保護.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋