Study on the Electrochemical Polarization and Stress Corrosion Cracking Behaviors of Alloy 690 in 5M Chloride Solutions at 25℃

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 化學工程與材料工程學系暨碩士班 > 期刊論文 > Item 987654321/35580

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/35580

题名:	Study on the Electrochemical Polarization and Stress Corrosion Cracking Behaviors of Alloy 690 in 5M Chloride Solutions at 25℃ 690合金在25℃的5M NaCl溶液中之電化學極化與應力腐蝕行為研究
作者:	陳彥羽周良賓施漢章
贡献者:	化材系
关键词:	電位與pH值關係圖 690合金循環極化孔蝕均勻腐蝕鈍態慢速應變拉伸試驗 Potential-pH diagram Cyclic polarization Pitting corrosion General corrosion Passivation, SSRT
日期:	2005-12
上传时间:	2017-03-15 11:28:49 (UTC+8)
摘要:	An experimental, potential-pH diagram was constructed for the nickel-based Alloy 690 in 25℃ concentrated (5M) sodium chloride solution, using an cyclic polarization method. The domains of immunity, general corrosion, passivation, and pitting in 5M NaCl solutions were defined. At pH＞4 the passive region subdivided into areas of perfect passivation, imperfect passivation, and pitting. After anodic polarization, the surface of each specimen was carefully examined metallographically. Pitting corrosion was observed over the entire pH range investigated (0.3-8.52) but general corrosion predominated at lower pH values (＜3). On the other hand, the mechanical properties, such as ultimate tensile strength (UTS), strain at fracture and the reduction area (RA) measured by the slow strain rate test (SSRT), decreased significantly at pH＜3. The SSRT results are consistent with fractography and side-view observations of the tested specimens by SEM.
關聯:	防蝕工程； 19卷4期 (2005 / 12 / 01) ， P523 - 539
显示于类别:	[化學工程與材料工程學系暨碩士班] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	86	检视/开启

检视Licence

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....