H2S sensing properties of noble metal doped WO3 thin film sensor fabricated by micromachining

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 化學工程與材料工程學系暨碩士班 > 期刊論文 > Item 987654321/2991

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/2991

题名:	H2S sensing properties of noble metal doped WO3 thin film sensor fabricated by micromachining
作者:	Tao WH Tsai CH
贡献者:	化工系
关键词:	H2S gas sensor MEMS technology tungsten oxide sputtering
日期:	2002
上传时间:	2009-12-11 10:11:43 (UTC+8)
摘要:	The purpose of this research is to develop a semiconductor-type H2S gas sensor with silicon-based microfabrication and micromachining technology. This successful approach allows for the production of small, geometrically well-defined sensors that are reliable and mechanically robust, and is compatible with VLSI processes. Individual sensor cost is also greatly reduced because the sensors are batch fabricated. The main sensing region is covered with a 300 mum x 300 mum. WO3 thin film, which is deposited by RF sputtering on silicon wafer substrate. Platinum (Pt), gold (Au) or Au-Pt noble metals was then deposited onto WO3 thin film as activator layer by sputtering. Under 1 ppm H2S and at an operating temperature of 220 degreesC, the individual sensitivities of the Pt and the Au-Pt doped WO3 gas sensors are 23 and 5.5, respectively. The sensor response times of Pt, Au-Pt and Au doped WO3 thin films are 30, 2 and 8 s, respectively, and the recovery times are about 30, 30 and 160 s, respectively. The results show that the Pt doped WO3 gas sensor exhibits acceptable response time, recovery time and as well as a high sensitivity. (C) 2002 Elsevier Science B.V All rights reserved.
關聯:	SENSORS AND ACTUATORS B-CHEMICAL Volume: 81 Issue: 2-3 Pages: 237-247
显示于类别:	[化學工程與材料工程學系暨碩士班] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	Text	588	检视/开启

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....