Improving conversion efficiency of dye-sensitized solar cells by metal plasma ion implantation of ruthenium ions

CCUR > College of Natural Science and Engineering > College of Engineering > Department of Chemical & Materials Engineering > journal articles > Item 987654321/24036

Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/24036

Title:	Improving conversion efficiency of dye-sensitized solar cells by metal plasma ion implantation of ruthenium ions
Authors:	Yen, CC (Yen, Chung-Chih) Wang, DY (Wang, Da-Yung) Chang, LS (Chang, Li-Shin) Shih, MH (Shih, Ming-Huei) Shih, HC (Shih, Han C.)
Contributors:	Inst Mat Sci & Nanotechnol
Keywords:	Metal plasma ion implantation Dye-sensitized solar cell TiO(2) Ruthenium
Date:	2011-05-31
Issue Date:	2013-01-18 10:31:21 (UTC+8)
Abstract:	Dye-sensitized solar cells (DSSC) are based on the concept of photosensitization of wide-band-gap mesoporous oxide semiconductors. At present DSSC have ventured into advanced development and pilot production. Our current research emphasizes on improvements on titanium dioxide (TiO(2)) photosensitivity under visible light irradiation by using metal plasma ion implantation (MPH). The anatase TiO(2) electrode was prepared via a sol-gel process and deposited onto indium-tin oxide glass substrates. Subsequently, the as-deposited TiO(2) films were subjected to MPII at 20 key in order to incorporate ruthenium (Ru) atoms onto the TiO(2) surface layer. The Ru-implanted TiO(2) thin film possessed nanocrystalline Ru clusters of 20 nm in diameter and distributed in near surface layer of TiO(2) films. The Ru clusters showed effective in both prohibiting electron-hole recombination and generating additional Ru-O impurity levels for the TiO(2) band gap structure. A significant reduction of TiO(2) band gap energy from 3.22 to 3.11 eV was achieved, which resulted in the extension of photocatalysis of TiO(2) from UV to Vis regime. A small drop of photoelectric performance of 8% was obtained due to the incorporation of Ru atoms in the surface layer of TiO(2), a similar side effect as observed in the Fe-implanted TiO(2). However, the overall retention of the photocatalysis capability is as high as 92% when switch from UV to Vis irradiation. The improvement of the photosensitivity of TiO(2) DSSC by means of metal plasma ion implantation is promising. (C) 2011 Elsevier B.V. All rights reserved.
Relation:	THIN SOLID FILMS Volume: 519 Issue: 15 Special Issue: SI Pages: 4717-4720
Appears in Collections:	[Department of Chemical & Materials Engineering] journal articles

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	343	View/Open

View Licence

Loading...