環保彈性體接枝矽烷之製備與性質研究

CCUR > College of Natural Science and Engineering > College of Engineering > College of Engineering > Chinese Culture University Hwa Kang Journal of Engineering > Item 987654321/21760

Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/21760

Title:	環保彈性體接枝矽烷之製備與性質研究
Other Titles:	Preparation and Properties of Environmental Elastomer Grafted Silane
Authors:	楊程皓唐士賢陳文智賴森茂
Contributors:	工學院
Keywords:	mPE clay silane 水交聯機械性質奈米複合材料 mPE clay silane crosslinking mechanical properties nanocomposites
Date:	2010-01-01
Issue Date:	2012-03-21 12:54:48 (UTC+8)
Abstract:	本研究從事Metallocene polyethylene-octene elastomer mPE(M)/mPE(M)-g-silane 20phr與mPE(M)/mPE(M)-g-silane 20phr之合膠材料之製備(M: medium crystallinity, L: low crystallinity)，使用DCP(Dicumyl peroxide)為起始劑，DBTL(Dibutyin Dilaurate)作為催化劑，VTEOS (Vinyl Triethoxy Silane)當交聯劑，使用不同型號的mPE為相容劑。以70℃水浴進行水交聯後，測量熱性質與機械性質。利用剝離測試，測量合膠材料對於射出製程中常用PET膜的極性，發現純的mPE對於PET膜的極性並不高，主要的極性來源silane；加入黏土後，部分silane與黏土作用，所以極性降低。因此，適當的調整配方比例有其必要性。 Metallocene polyethylene-octene elastomer (mPE) blends are obtained and studied by using mPE (M)-g-silane and mPE (L)-g-silane as the adhesion promoters (M: medium crystallinity, L: low crystallinity). First, two different types of metallocene polyethylene-octene were grafted with vinyl triethoxy silane, then followed by the mixing those materials with mPE (M). The crosslinking reaction was conducted in water at 70℃. The polarity of those materials is mainly from silane. If the contents of clay were increased, a part of silane would react with clay and the polarity of those materials would decrease, instead. Overall, the mechanical properties reached the prescribed requirement..
Relation:	華岡工程學報 25期 p.117 -122
Appears in Collections:	[College of Engineering] Chinese Culture University Hwa Kang Journal of Engineering

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	536	View/Open

Loading...